Accurate Metals & Alloys is a major producer, exporter, and distributor of a broad variety of high standard Duplex Steel 2304 Sheets, Plates, and Coils. Duplex Steel 2304 also known as 2205 steel is another very extensively used duplex ferritic and austenitic stainless steel grade. We provide Duplex Steel 2304 Sheets, which are used in a variety of applications because to their outstanding corrosion resistance and superior strength. They are fabricated using high certified raw materials and are described in accordance with national and international standards.
Forging temperatures for these Duplex Steel S32304 Slating Sheets should be between 1100 and 1250 degrees Celsius, with re-heating as needed and cooling in still air. With 22 percent chromium, 3 % molybdenum, and 5 % to 6 % nickel alloy, Duplex Stainless Steel S32304 Perforated Sheets is a two-phase, ferritic, and austenitic steel. Our Duplex Steel S32304 sheet provides superior proven corrosion resistance. The superior features of our Sheets are that they have decent machinability, low coefficient of thermal expansion, impact resistance, good electrical conductivity, and ease of fabrication are all advantages.
Table of Contents
Our Duplex Steel S32304 sheet offers ultimately proven corrosion resistance, so they are used in a variety of purposes that associate with chloride-containing environments, and these sheets have been used in a variety of industries such as Welded pipe systems in the Pulp and Paper, Biological, and, Petroleum, and Water Purification industrial sectors, Transport systems, Heat exchanger tubes, Architecture, and construction.
Here at Accurate Metals & Alloys, We carry Non-Destructive testing and destructive testing, hardness and Mechanical testing, 100% Radiography test etc. We have highly experienced team to look after the manufacturing process of these Duplex Steel 2304 Sheets. These testing is carried, to assure that the quality of these sheets is not deteriorated. All these sheets are manufactured through, modern and cutting edge tools and technology, we also use highly advanced tools and equipment’s for exact and accurate applications.
STANDARD | WERKSTOFF NR. | UNS |
Duplex 2304 | 1.4362 | S32304 |
WEIGHT% | C | SI | MN | S | P | CR | NI | MO | N | CU | B |
MIN. | 22,00 | 3,50 | 0,10 | 0,05 | 0,10 | ||||||
MAX. | 0,030 | 1,00 | 2,00 | 0,015 | 0,035 | 24,00 | 5,50 | 0,60 | 0,20 | 0,60 | 35 PPM |
YIELD STRENGTH RP0.2 MPA |
TENSILE STRENGTH RM MPA |
ELONGATION [%] |
HARDNESS [HB] |
IMPACT, CHARPY-V, -46ºC [J] |
PRE | |
PLATE CR | (T<13MM) ≥ 500 | ≥ 690 | ≥ 25 | ≥ 45 | ≥ 28 | |
PLATE HR | (T≥13MM) ≥ 420 | ≥ 630 | ≥ 25 | ≤ 290 | ≥ 45 | ≥ 28 |