Accurate Metals & Alloys LLP is respected producer , distributor and stockiest of SS 410 Sheets Plates and Coils we fortify all the 1.4006 SS products are grant in high quality.
Our Stainless Steel 410 is a primary martensitic grade with 11.5 percent chromium content, furnishing excellent wear and resistance to corrosion. Stainless Steel 1.4006 Sheets and Plates are resistant to corrosion precipitate chemicals, food and mild acids, water, and air.
It also abides nitric acid, concentrated sulfuric acid, dilute acetic acid, and naphtha. When hardened and tempered, Stainless Steel 410 coils demonstrate augmented mechanical qualities and corrosion resistance. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our UNS S41000 Stainless Steel. 1.4006 Stainless Steel coils are mostly used in applications that require light resistance to rusting, max strength, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all resistant to 1.4006 SS plates. Through tempering, these steels lessens corrosion and resists to elevated temperatures. Grade 410 stainless steel Sheet, on the other hand, are less don’t rust more, than austenitic grades and ferritic alloys containing 17 % chromium, such as grade 430. At temperature above 650°C, Grade 410 plate of steel offer good resistance. Furthermore, at excessive temperatures from 400 to 580 ° Celsius, the material’s mechanical strength began to degrade. Grade 410 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 degree Celsius, before being annealed after welding to avoid damages.
In frequently tempered or annealed state, UNS S41000 stainless steel coils is implemented easily. It is nevertheless, hard to mill 1.4006 coils of stainless steel that have been hardened over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. UNS S41000 Stainless Steel Plate is mostly used in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp manufacturers. 1.4006 Stainless Steel Plate is accessible in a variety of diameters and dimensions to fulfill the needs of our clients. We provide UNS S41000 Stainless Steel Coils in a many of customizations.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
