Accurate Metals & Alloys LLP is prominent manufacturer, supplier and stockiest of SS 410 Sheets Plates and Coils we assure all the UNS S41000 Stainless Steel products are offered in high quality.
Our Stainless Steel UNS S41000 is a primary martensitic grade with 11.5 percent chromium concentration, providing excellent wear and resistance to corrosion. SS 410 Sheet and Plate is are resistant to corrosion caused by chemicals, food and mild acids, water, and air.
It also resists nitric acid, concentrated sulfuric acid, dilute acetic acid, and naphtha. When made solid and tempered, Stainless Steel 1.4006 coils demonstrate improved mechanical qualities and corrosion resistance. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our 410 Stainless Steel. 410 SS coils are commonly used in applications that require light resistance to oxidation, max toughness, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all resistant to UNS S41000 SS plates. Through tempering, these steels maximize corrosion and resistive to elevated temperatures. Grade 410 SS Sheet, else, are less don’t rust more, than austenitic grades and ferritic alloys consisting 17 percent chromium, such as grade 430. At higher temps to 650°C, 1.4006 plates of steel offer good resistance. Moreover, at extreme temperatures from 400 to 580 ° Celsius, the material’s mechanical strength began to deteriorate. UNS S41000 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 degree C, before being annealed after welding to avoid damages.
In severely tempered or annealed condition, Grade 410 SS coils can be easily machined. It is however, hard to mill 1.4006 sheets of SS that have been solidify over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. 410 Stainless Steel Coil is mostly used in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp fabricators. 1.4006 Stainless Steel Plate is available in a many of diameters and measurements to fulfill the needs of our customers. We offer 410 SS Coils in a variety of custom design.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
