Accurate Metals & Alloys LLP is prominent manufacturer, distributor and stockiest of Stainless Steel UNS S41000 Sheets Plates and Coils we fortify all the UNS S41000 SS products are grant in premium quality.
Our SS 1.4006 is a primary martensitic grade with 11.5 percent chromium concentration, providing outstanding wear and resistance to corrosion. SS 410 Sheets and Plates are corrosion resistance caused by chemicals, food and mild acids, water, and air.
It also abides nitric acid, complete sulfuric acid, dilute acetic acid, and naphtha. When made solid and tempered, SS 1.4006 coils exhibit improved mechanical qualities and corrosion resistance. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our 1.4006 Stainless Steel. 410 Stainless Steel coils are mostly used in applications that require light resistance to oxidation, max strength, and thermal conductivity.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all impermeable to 1.4006 SS plates. Through tempering, these steels maximize rusting and resists to elevated temperatures. 1.4006 SS Sheet, on the other hand, are less don’t rust more, than austenitic grades and ferritic alloys containing 17 percent chromium, such as grade 430. At higher temps to 650°C, UNS S41000 plates of steel offer good protection. Furthermore, at high temperatures from 400 to 580 degree C, the material’s mechanical strength began to deteriorate. Grade 410 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 ° Celsius, before being annealed after welding to prevent cracking.
In severely tempered or annealed state, 1.4006 SS sheets is implemented easily. It is however, difficult to mill UNS S41000 plates of stainless steel that have been solidify over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. UNS S41000 SS Coil is generally used in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp manufacturers. 1.4006 Stainless Steel Plate is accessible in a many of diameters and measurements to fulfill the needs of our clients. We offer 410 SS Coils in a variety of customizations.
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
---|---|---|---|---|---|---|---|
SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
Grade | C | Mn | Si | P | S | Cr | Ni |
---|---|---|---|---|---|---|---|
SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|
480 min | 275 min | 16 min |