Accurate Metals & Alloys LLP is notable producer , distributor and exporter of Stainless Steel UNS S41000 Sheet, Plate and Coil we assure all the UNS S41000 Stainless Steel products are grant in premium quality.
Our Stainless Steel UNS S41000 is a basic martensitic grade with 11.5 percent chromium content, furnishing excellent wear and resistance to corrosion. Stainless Steel 1.4006 Sheets and Plates are resistant to corrosion caused by chemicals, food and mild acids, water, and air.
It also resists nitric acid, complete sulfuric acid, dilute acetic acid, and naphtha. When made solid and tempered, SS 1.4006 coils exhibit improved mechanical qualities and non corrodible. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our 410 SS. UNS S41000 Stainless Steel coils are commonly used in applications that require light resistance to oxidation, max toughness, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all impermeable to UNS S41000 stainless steel plate. Through tempering, these steels lessens rusting and resistive to elevated temperatures. UNS S41000 stainless steel Sheet, else, are less don’t rust more, than austenitic grades and ferritic alloys containing 17 % chromium, such as grade 430. At higher temps to 650°C, UNS S41000 plates of steel offer good protection. Moreover, at high temperatures from 400 to 580 degree Celsius, the material’s mechanical strength began to degrade. UNS S41000 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 degree Celsius, before being annealed after welding to prevent cracking.
In severely tempered or annealed condition, UNS S41000 stainless steel sheets can be easily machined. It is however, hard to mill UNS S41000 sheets of SS that have been hardened over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. UNS S41000 SS Plate is mostly seen in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp manufacturers. 1.4006 SS Sheet is accessible in a many of thicknesses and dimensions to fulfill the requirements of our customers. We offer 410 Stainless Steel Coils in a many of custom design.
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
---|---|---|---|---|---|---|---|
SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
Grade | C | Mn | Si | P | S | Cr | Ni |
---|---|---|---|---|---|---|---|
SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|
480 min | 275 min | 16 min |