Accurate Metals & Alloys LLP prominent producer , supplier and exporter Stainless Steel 409 Sheets, Plates, and Coil to customers around the globe. We make all of these products using the latest cutting edge machinery.
Grade 409 SS is ferritic steel with good mechanical qualities and resistance to the excessive degree explosion. 409 is frequently referred to as Chromium stainless steel. These 1.4512 Sheets and Coils are used in evacuation system and other weld-able applications. The presence of niobium, titanium or both in the steel plate’s formation provides stability in this grades. 1.4512 SS Surpasses 410 martensitic grades with 12 percentage of chromium and 3CR12 regarding of discharge of gas and air corrosion resistance. We are aware of our purchasers requirements and are interested in the prerequisites of the industry’s dissimilar applications alloys in order to connect effectively.
The corrosion resistance in UNS S40900 Coil is, however, lower than that of grade 430 steel with 17 percent chromium. The top layer of grade 409 SS sheets are susceptible to moderate corrosion, restricting their use as structural requirements.
Scaling resistance is provided by plates and sheets of Grade 409 stainless steel at temperatures up to 675 degrees C in persistent operation and up to 815 degree Celsius in fluctuating interval. Grade 409 Stainless Steel Sheets & Plates are implacable at temperatures ranging from 790 to 900 degree C before being air quenched. Stainless Steel 1.4512 Plates are not toughened by thermal treatment. Before welding, SS 1.4512 sheet, plates and coils they must be already heated to temperatures varying from 150 degree C to 260 degree C.
Accurate Metals & Alloys LLP has trained and competent workforce observing after the production process of these Stainless Steel 1.4512 Sheets, Plates, and Coils. Our worker inspect these products on all stages, which confirm the sheets and plates have no damages. A standard packaging procedure is followed to ensure glitch free delivery. Mechanical testing, Positive material testing, Chemical testing, Spectro analysis testing, Intergranular corrosion testing, Tensile testing, and Third-Party Inspection are all performed according to the product’s requirements and client requests. We wrap these products carton boxes, hardwood crates, pallets, and shrink-wrapped as well. We offer our products at a very reasonable cost.
| Grade | WERKSTOFF NR. | AISI | UNS | AFNOR | BS | GOST | JIS |
| SS 409 | 1.4512 | 409 | S40900 | Z3CT12 | 409 S 19 | SUH 409 | – |
| Grade | C | Ni strong> | Si | S | Mn | P | Cr | Ti | |
| SS 409 | Min | – | – | – | – | – | – | 10.5 | 6x C |
| MAX | 0.08 | 0.5 | 1.00 | 0.045 | 1.00 | 0.045 | 11.75 | 0.75 | |
| Tensile Strength(MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Rockwell B (HRB) max | Brinell (HB) max |
| 450 | 240 | 25 | 75 | 131 |
