Accurate Metals & Alloys LLP is prominent producer , supplier and exporter of SS 1.4006 Sheet, Plate and Coil we fortify all the UNS S41000 Stainless Steel products are offered in superior quality.
Our SS 1.4006 is a primary martensitic grade with 11.5 percent chromium content, furnishing outstanding wear and resistance to corrosion. Stainless Steel 410 Sheet and Plate is are corrosion resistance precipitate chemicals, food and mild acids, water, and air.
It also abides nitric acid, complete sulfuric acid, dilute acetic acid, and naphtha. When hardened and tempered, Stainless Steel UNS S41000 coils demonstrate improved mechanical qualities and corrosion resistance. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our UNS S41000 Stainless Steel. 1.4006 Stainless Steel coils are commonly used in applications that prefer light resistance to oxidation, max toughness, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all impermeable to UNS S41000 SS plates. Through tempering, these steels lessens rusting and resistive to elevated temperatures. Grade 410 stainless steel sheets, on the other hand, are less don’t rust more, than austenitic grades and ferritic alloys containing 17 % chromium, such as grade 430. At temperature above 650°C, Grade 410 plates of steel offer good protection. Moreover, at excessive temperatures from 400 to 580 ° Celsius, the material’s mechanical strength began to deteriorate. UNS S41000 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 degree Celsius, before being annealed after welding to prevent cracking.
In frequently tempered or annealed state, UNS S41000 SS plates can be easily machined. It is however, hard to mill 1.4006 coils of stainless steel that have been solidify over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. 410 SS Plate is generally used in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp fabricators. UNS S41000 SS Sheet is accessible in a variety of diameters and measurements to fulfill the needs of our customers. We offer 410 Stainless Steel Coils in a many of customizations.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
