Accurate Metals & Alloys LLP is prominent producer , distributor and stockiest of SS 410 Sheet, Plate and Coil we assure all the 1.4006 SS products are offered in high quality.
Our Stainless Steel 410 is a primary martensitic grade with 11.5 percent chromium content, furnishing outstanding wear and resistance to corrosion. Stainless Steel UNS S41000 Sheet and Plate is are corrosion resistance precipitate chemicals, food and mild acids, water, and air.
It also resists nitric acid, complete sulfuric acid, dilute acetic acid, and naphtha. When hardened and tempered, SS UNS S41000 coils demonstrate augmented mechanical qualities and corrosion resistance. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our UNS S41000 SS. UNS S41000 SS coils are mostly utilized in applications that require light resistance to rusting, max strength, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all impermeable to UNS S41000 SS plate. Through tempering, these steels maximize rusting and resistive to high temperatures. Grade 410 stainless steel sheets, on the other hand, are less don’t rust more, than austenitic grades and ferritic alloys containing 17 percent chromium, such as grade 430. At temperature above 650°C, UNS S41000 plate of steel offer good resistance. Furthermore, at more temperatures from 400 to 580 degree Celsius, the material’s mechanical strength began to deteriorate. UNS S41000 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 ° Celsius, before being annealed after welding to prevent damages.
In severely tempered or annealed condition, 1.4006 stainless steel plates is implemented easily. It is nevertheless, difficult to mill 1.4006 coils of stainless steel that have been solidify over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. 1.4006 Stainless Steel Plate is mostly utilized in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp fabricators. UNS S41000 SS Sheet is accessible in a variety of diameters and measurements to fulfill the requirements of our clients. We provide UNS S41000 SS Coils in a many of customizations.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
