Accurate Metals & Alloys LLP is prominent manufacturer, distributor and stockiest of Stainless Steel 410 Sheets Plates and Coils we fortify all the UNS S41000 SS products are grant in high quality.
Our Stainless Steel 1.4006 is a primary martensitic grade with 11.5 percent chromium content, furnishing outstanding wear and resistance to corrosion. SS 1.4006 Sheets and Plates are corrosion resistance precipitate chemicals, food and mild acids, water, and air.
It also resists nitric acid, complete sulfuric acid, dilute acetic acid, and naphtha. When made solid and tempered, SS 410 coils demonstrate augmented mechanical qualities and corrosion resistance. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our UNS S41000 Stainless Steel. UNS S41000 SS coils are mostly used in applications that prefer light resistance to oxidation, max strength, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all resistant to Grade 410 stainless steel plates. Through tempering, these steels lessens rusting and resists to high temperatures. Grade 410 SS sheets, on the other hand, are less don’t rust more, than austenitic grades and ferritic alloys containing 17 percent chromium, such as grade 430. At temperature above 650°C, UNS S41000 plates of steel offer good protection. Moreover, at high temperatures from 400 to 580 ° Celsius, the material’s mechanical strength began to deteriorate. Grade 410 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 ° Celsius, before being annealed after welding to prevent damages.
In frequently tempered or annealed state, UNS S41000 stainless steel plates is implemented easily. It is however, difficult to mill Grade 410 plates of stainless steel that have been solidify over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. 1.4006 SS Plate is mostly seen in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp fabricators. 1.4006 SS Coil is accessible in a many of diameters and dimensions to meet the requirements of our clients. We offer 410 SS Coils in a many of custom design.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
