Accurate Metals & Alloys LLP is a prominent producer, supplier, and exporter of SS UNS S41000 Sheet, Plate, and Coil. We fortify that all the UNS S41000 Stainless Steel products are granted high quality.
Our SS UNS S41000 is a primary martensitic grade with 11.5 percent chromium content, furnishing excellent wear and corrosion resistance. SS UNS S41000 Sheets and Plates are corrosion resistance precipitate chemicals, food and mild acids, water, and air.
It also abides nitric acid, complete sulfuric acid, dilutes acetic acid, and naphtha. When made solid and tempered, SS UNS S41000 coils exhibit improved mechanical qualities and corrosion resistance. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our UNS S41000 SS. 410 SS coils are mostly utilized in applications that prefer light resistance to oxidation, max strength, and thermal conductivity.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all resistant to Grade 410 SS plates. Through tempering, these steels lessen rusting and are resistant to elevated temperatures. UNS S41000 stainless steel sheets, on the other hand, are less don’t rust than austenitic grades and ferritic alloys containing 17 percent chromium, such as grade 430. At higher temps of 650°C, the UNS S41000 plate of steel offers good resistance. Moreover, the material’s mechanical strength began to degrade at excessive temperatures from 400 to 580°C. UNS S41000 sheets of steel can be forged using any traditional welding procedure; however, they should be pre-heated at 150 to 260℃ before being annealed after welding to avoid cracking.
In frequently tempered or annealed conditions, UNS S41000 stainless steel sheets are implemented easily. It is, however, difficult to mill Grade 410 coils of stainless steel that have been solidifying over 30HRC. Bolts, screws, bushings, nuts, Hydrocarbon fractionating mechanisms, Shafts, pumps, valves Mine ladders, rungs, and Gas turbines. 410 SS Sheet is mostly used in oil and gas, chemical plants and machinery, nuclear power projects, and paper and pulp manufacturers. 410 Stainless Steel Coil is available in various thicknesses and dimensions to fulfill the needs of our customers. We offer 410 Stainless Steel Coils in a variety of custom designs.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
