Accurate Metals & Alloys LLP is an acclaimed distributor and exporter of Stainless Steel 316/316L/316Ti Sheets, Plates, Coils in Shiroli, Kolhapur. Our Stainless Steel 316L Coils are obtainable in various finishes, dimensions, thicknesses, length, tolerances, etc. we also fabricate these in tailor made specifications as per the needs of our valuable customers at the most economic prices. Our SS 1.4404 Plates are manufactured by making use of superior quality raw materials and cutting edge technology equipment in compliance with globally accepted quality standards like ASME, etc.
SS 316L Plates offer corrosion resistance in contaminated seawater atmospheres and are resistant to pitting and cracking corrosion in the chloride-contaminated media, seawater and acetic acid vapors, higher toughness, ductility and better creep resistance at higher temperatures. SS UNS S31603 Sheets have superb oxidation resistance in irregular service to 870 degrees C and in regular service to 925 degrees C, magnificent mechanical characteristics and fabricability, etc. ASTM A240 Stainless Steel 1.4404 Sheets have higher toughness at elevated temperatures so are usually used for architectural and pressure-containing applications at temperatures between 500 to 800 degrees C. SS UNS S31600 Coils have exceptional corrosion resistance in numerous chemicals, especially in acidic chloride conditions.
1.4404 Stainless Steel Plates are utilized in numerous industries like Food Preparation Equipment, Laboratory Benches & Equipment, Off-Shore Modules, Ship Building Equipment, Chemical Containers Including For Transport, Pressure Vessels, Tanks And Storage Vessels for Corrosive Liquids, Architectural Applications in highly corrosive environments, etc.
We at Accurate Metals & Alloys LLP offer superior quality ASTM A240 Stainless Steel 1.4401 Coils, which are matches to our customers’ needs and specifications. We also perform a lot of checks on our products. The tests are conducted to guarantee the highest quality products, these include 100% radiography, Flaring and flattening tests, Positive Material Identification Tests, third-party inspection testing. We carry out this test to make sure that the product is defect-free.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401/1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
| SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 316 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 min |
| SS 316L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 68.89 min |
| SS 316Ti | 0.08 max | 2.0 max | 0.75 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 10.00 – 14.00 | 68.395 min |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SS 316 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| SS 316L | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| SS 316Ti | 8.0 g/cm3 | 1399 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
