Accurate Metals & Alloys LLP is notable manufacturer, distributor and stockiest of Stainless Steel 1.4006 Sheets Plates and Coils we assure all the UNS S41000 SS products are offered in high quality.
Our SS 410 is a basic martensitic grade with 11.5 percent chromium concentration, furnishing outstanding wear and corrosion resistance. SS 1.4006 Sheet and Plate is are corrosion resistance precipitate chemicals, food and mild acids, water, and air.
It also resists nitric acid, complete sulfuric acid, dilute acetic acid, and naphtha. When made solid and tempered, Stainless Steel UNS S41000 coils demonstrate improved mechanical qualities and non corrodible. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our 1.4006 SS. 410 SS coils are commonly utilized in applications that require light resistance to oxidation, max strength, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all resistant to Grade 410 stainless steel plates. Through tempering, these steels maximize rusting and resistive to high temperatures. Grade 410 SS Sheet, else, are less don’t rust more, than austenitic grades and ferritic alloys consisting 17 % chromium, such as grade 430. At temperature above 650°C, 1.4006 plate of steel offer good resistance. Moreover, at extreme temperatures from 400 to 580 ° Celsius, the material’s mechanical strength began to deteriorate. 1.4006 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 degree Celsius, before being annealed after welding to avoid cracking.
In frequently tempered or annealed state, 1.4006 SS plates is implemented easily. It is nevertheless, difficult to mill 1.4006 coils of stainless steel that have been hardened over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. 1.4006 Stainless Steel Sheet is generally utilized in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp manufacturers. 1.4006 SS Coil is accessible in a many of diameters and measurements to meet the needs of our clients. We provide UNS S41000 Stainless Steel Coils in a many of custom design.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
