Accurate Metals & Alloys LLP is the leading manufacturer, supplier, and stockiest of SS UNS S41000 Sheet, Plate, and Coil. We fortify all the 410 Stainless Steel products are granted in high quality.
Our SS 410 is a primary martensitic grade with 11.5 percent chromium content, providing outstanding wear and resistance to corrosion. Stainless Steel 410 Sheets and Plate are corrosion resistant caused by chemicals, food and mild acids, water, and air.
It also abides nitric acid, complete sulfuric acid, dilutes acetic acid, and naphtha. When hardened and tempered, Stainless Steel 1.4006 coils demonstrate augmented mechanical qualities and are non-corrodible. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our 1.4006 Stainless Steel. SS 410 coils are commonly used for purposes that prefer light resistance to oxidation, max toughness, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all resistant to Grade 410 SS plates. Through tempering, these steels lessen corrosion and resist elevated temperatures. On the other hand, grade 410 stainless steel sheets don’t rust more than austenitic grades such as grade 430. At higher temps of 650°C, 1.4006 plates of steel offer good resistance. Furthermore, at more temperatures from 400 to 580°C, the material’s mechanical strength began to deteriorate. UNS S41000 sheets of steel can be forged using any traditional welding procedure; however, they should be pre-heated at 150 to 260°C before being annealed after welding to avoid cracking.
In severely tempered or annealed conditions, UNS S41000 SS sheets can be easily machined. It is, however, difficult to mill Grade 410 coils of stainless steel that have been solidifying over 30HRC. Bolts, screws, bushings, nuts, Hydrocarbon fractionating mechanisms, Shafts, pumps, valves mine ladders, rungs, and gas turbines. SS 410 Coils are mostly seen in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp fabricators. Stainless Steel 410 Coil is accessible in many diameters and dimensions to fulfill the needs of our clients. We offer 410 Stainless Steel Coils in a variety of custom designs.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
