Accurate Metals & Alloys LLP is notable producer , distributor and stockiest of Stainless Steel UNS S41000 Sheets Plates and Coils we fortify all the 1.4006 SS products are grant in superior quality.
Our Stainless Steel 410 is a basic martensitic grade with 11.5 percent chromium concentration, providing excellent wear and corrosion resistance. SS UNS S41000 Sheets and Plates are resistant to corrosion precipitate chemicals, food and mild acids, water, and air.
It also resists nitric acid, complete sulfuric acid, dilute acetic acid, and naphtha. When made solid and tempered, Stainless Steel UNS S41000 coils exhibit improved mechanical qualities and non corrodible. Dental and medical equipment, pipeline, gates and funnels, automobiles, and more can all benefit from our UNS S41000 Stainless Steel. 410 SS coils are mostly utilized in purposes that require light resistance to rusting, max strength, and thermal potential.
Hot gases, steam, food, mild acids and alkalies, fresh water, and dry air are all resistant to Grade 410 SS plates. Through tempering, these steels maximize rusting and resists to elevated temperatures. Grade 410 stainless steel sheets, else, are less don’t rust more, than austenitic grades and ferritic alloys consisting 17 percent chromium, such as grade 430. At higher temps to 650°C, Grade 410 plates of steel offer good resistance. Furthermore, at excessive temperatures from 400 to 580 ° Celsius, the material’s mechanical strength began to degrade. UNS S41000 sheets of steel can be forged using any traditional welding procedure, however, they should be pre-heated at 150 to 260 degree Celsius, before being annealed after welding to avoid cracking.
In frequently tempered or annealed state, 1.4006 SS sheets can be easily machined. It is nevertheless, hard to mill UNS S41000 sheets of stainless steel that have been solidify over 30HRC. Bolts, screws, bushings, and nuts Hydrocarbon fractionating mechanisms, Shafts, pumps, and valves Mine ladders rungs, Gas turbines. UNS S41000 SS Coil is generally seen in the oil and gas sector, chemical plants and machinery, nuclear power projects, and paper and pulp fabricators. UNS S41000 SS Coil is available in a many of diameters and measurements to meet the needs of our clients. We provide 410 Stainless Steel Coils in a variety of custom design.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 410 | 1.4006 | S41000 | SUS 410 | 410 S 21 | – | Z 12 C 13 | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
|---|---|---|---|---|---|---|---|
| SS 410 | 0.15 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 13.5-11.5 | 0.75 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|
| 480 min | 275 min | 16 min |
