We manufacture the Stainless Steel 301LN Coils with extremely high-quality raw materials that are scaled on national and international standards. To provide good weldability and better ductility to the SS 301LN Coils, we reduce the carbon content in the SS 301LN grade. Meanwhile, to compensate for the lower concentration of carbon, we multiply the nitrogen levels. This compensation in the chemical composition of the SS 301LN grade not only balances it chemically but also offers a lot of mechanical properties to the SS 301LN Coils. The mechanical characteristics that this change in the chemical composition leads to SS 301LN Coils having excellent flexibility by good strength, the ability to form and weld very well, and superior performance in sub-zero temperature ranges. Above all, it exhibits great resistance against corrosion, and this is what makes it a fitting match to be used for household reasons.
Accurate Metals & Alloys is one of the most famous Stainless Steel 301LN Coil manufacturers, dealers, and stockists. We also export Stainless Steel 301LN Coils and other stainless steel products globally. We are best known for the quality that we deliver.
The Stainless 301LN Coils are reworked forms of Stainless Steel 301 and Stainless Steel 301L. The SS 301LN Coils are used mostly in the regions of conventional usage. We provide these SS 301LN in two essential profiles, which are by far the maximum consumed profiles: Stainless Steel 301LN Hot Rolled Coils and Stainless Steel 301LN Cold Rolled Coils.
Table of Contents
The Stainless Steel 301LN Coils are fabricated equally in household and industrial applications. These applications of SS 301LN are kitchen appliances, catering equipment, pressure vessels, automobile mouldings, wiper blades, stove elements, chemical factories, petrochemical industries, engineering firms, architectural construction components, and the oil and gas industry.
A few tests are carried out to verify the quality, material and durability of our Stainless Steel 301LN and confirm them according to national and international standards like ASTM, ASME, etc. Thus, the tests conducted are the Hardness test, Micro and Marco test, Positive Material Identification test, Flaring and Flattening test, Intergranular Corrosion test, Pitting Resistance test, and other Chemical and Mechanical tests.
|Element||Tensile strength (Outokumpu typical, cold rolled strip/sheet; EN 10002-1)||Yield strength (@strain 0.200 %)||Elastic modulus||Poisson’s ratio||Elongation at break (in 50 mm)|
|Metric||765 MPa||350 MPa||193 GPa||0.300||47%|
|Imperial||111000 psi||50800 psi||27992 ksi||0.300||47%|