Accurate Metals & Alloys is a steel firm launched in Mumbai. We have established in this industry well due to the superior standards of Stainless Steel 316 Coils that we assist our clients with. We are into manufacturing, exporting, and stocking the Stainless Steel 316 Coils and other stainless steel products. We are also in acquaintance with massive steel companies like JSL.
The Stainless Steel 316 Coils are the austenitic alloys of stainless steel. They are majorly involved in the chemical industry due to their strong mechanical properties, especially resisting qualities of SS 316 grade is exceptionally great. These SS 316 Coils are accessible in different profiles but the two most used profiles of SS 316 Coils are Stainless Steel 316 Hot Rolled Coils and Stainless Steel 316 Cold Rolled Coils.
Table of Contents
The Stainless Steel 316 Coils are the molybdenum induced austenitic editions of stainless steel. The SS 316 grade is the result of higher concentrations of nickel and molybdenum content. This increase in the levels of molybdenum and nickel leads to the bettering of the overall resistance characteristics offered by the SS 316 Coils when compared with the Stainless Steel 304 grade. This comparison is very evident in terms of the crevice corrosion in the chloride atmospheres and pitting resistance. To add to its excellence, the tensile strength of the Stainless Steel 316 Coils increases with the rising temperature. Apart from the tensile strength, the rupture, stress, and creep strength improve too. It is also known for its smoothing functioning while and after forming and welding.
The Saltiness Steel 316 Coils are applied essentially to the field of processing in science and technology. It is mainly focused on the physical and chemical regions. The machines that they are fit in are the ones from the Pharmaceutical Industry, Textile Industry, and Power Generation Industry. But they are more into the fabrication procedures Pollution Control Equipment, Heat Exchangers, Boat Fittings Rubber and Plastic Parts, Laboratory Benches, etc.
Finally, for the packaging of the Stainless Steel 316 Coils, we roll these SS 316 Coil materials into coils, secure them in the wooden crates and boxes, and sent them off for the delivery of the SS 316 Coils to our clients.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316 | 1.4401/1.4436 | S31600 | SUS 316 | 316S31 / 316S33 | – | Z7CND17‐11‐02 | X5CrNiMo17-12-2 / X3CrNiMo17-13-3 |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 316 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 16.00 – 18.00 | 2.00 – 3.00 | 11.00 – 14.00 | 67.845 min |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SS 316 | 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
