Accurate Metals & Alloys is one of India’s leading suppliers of Stainless Steel 309 sheets. Our stainless steel sheets resist corrosion and oxidation, are heat resistant, and have increased strength at high temperatures. These SS Grade 309 Sheets are available in various sizes and wall thicknesses. They stand out from the competition because of our low price.
SS 309 Sheets are in high demand from a wide range of customers. The manufacturing procedures of SS 309 Sheets, which are converted to greater tensile strength and yield capability by cold processing, are exclusively handled by the most qualified engineers. Before these goods are manufactured for the industry, they are subjected to strength, fabrication, and weldability tests. The SS 309 machining process produces 309 Stainless Steel 309 Sheets as a by-product. These usually have holes in them to aid with heat management. These sheets are non-cyclic when exposed to oxidation at 1900 degrees Fahrenheit. Using High Chromium and Nickel Content 309 1830℉(1000℃) And Frequent cycles of low thermal oxidation resistance of approximately 1850℉ (1010℃) may produce in an environment of sulphur owing to alloys. Carburizing is not advised for this alloy.
SS 309 Sheets are in high demand from a wide range of customers. The manufacturing procedures of SS 309 Sheets, which are converted to greater tensile strength and yield capability by cold processing, are exclusively handled by the most qualified engineers. Before these goods are manufactured for the industry, they are subjected to strength, fabrication, and weldability tests. The SS 309 machining process produces 309 Stainless Steel 309 Sheets as a by-product. These usually have holes in them to aid with heat management. These sheets have a non-cyclic condition when exposed to oxidation at 1900 degrees Fahrenheit. Using High Chromium and Nickel Content 309 1830 Degree F (1000 Degree C) And Frequent cycles of low thermal oxidation resistance of approximately 1850 Degree F (1010 Degree C) may produce in an environment of sulfur owing to alloys. Carburizing is not advised for this alloy.
Table of Contents
These SS 309 stainless steel offer required rough surfaces for stair usage. The stainless steel 309 sheets are manufactured using cutting-edge technology that is continually updated. The raw materials are checked to guarantee that only pure components are utilized in the manufacturing process.
The SS 309 Sheets meet all international quality requirements. They are the preferred material for aviation engines and components, boiler baffles, and heat exchangers because of their resistance to creep deformations and environmental corrosion. Before delivering the stainless steel 309 sheet or any other Stainless Steel products manufactured here, it is tested, both physical and chemical. These tests guarantee that the product is of the greatest quality and has not been tampered with throughout the manufacturing or handling process.
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 309 | 1.4828 | S30900 | SUS 309 | – | – | – | – |
| Grade | C | Mn | Si | P | S | Cr | Ni |
| SS 309 | 0.20 max | 2 max | 1 max | 0.045 max | 0.030 max | 23 max | 14 max |
| Grade | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 309 | Psi – 89900 , MPa – 620 | Psi – 45000 , MPa – 310 | 45 % |
