Accurate Metals & Alloys is a leading 316LN Stainless Steel Sheets, manufacturer, stockist, dealer, supplier, and exporter. We are a major manufacturer of Grade 316, 316L, 316LN, and 316Ti sheets, coil, and plates. These Sheets are typically utilized components that are quite thin due to the lack of welding. Stainless steel sheet 316LN, on the other hand, has a range of uses for additional welding.
The most common stainless steel sheet is 316LN, which has micro nickel, manganese, and low nitrogen content. 316LN stainless steel Sheet structures on steel at extremely high temperatures. These SS 316 LN sheets refer to their characteristic mix of vendibility and formability. This Grade of 316LN stainless steel sheet, cannot be heat hardened. Grade 316LN stainless steel sheets offer significant crystal structure annealing, increasing the minimum stipulated yield strength. The Stainless Steel Grade 316LN sheets have good and general corrosion, pitting, and crevice resistance to corrosion.
Table of Contents
These stainless steel 316LN sheets have nitrogen and low carbon content, which improves their workability and characteristics. The addition of nitrogen to SS 316LN Sheets Increases Hardness and Minimum yield strength. It also has good resistance to pitting, crevice corrosion, and general corrosion. The usage of molybdenum helps to prevent corrosion. Besides that, in the annealed state, it has a smaller magnetic field. Stainless steel 316LN Sheets are also utilized in a variety of sectors nowadays, which include the paper and pulp industry, textile business, chemical industry, low-temperature equipment, and so on.Almost all industries use these sheets. These 316LN stainless steel sheets are also widely used in the medical field for orthopedic implants, neurological applications, and surgical tools.
STANDARD | WERKSTOFF NR. | UNS |
SS 316LN | 1.4429 | S31635 |
Grade | Fe | Cr | Ni | Mo | Mn | Si | N | P | C | S |
SS 316LN | Balance | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 2.00 | 1.00 | 0.10-0.30 | 0.045 | 0.03 | 0.03 |
Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation (%) | HBW | HRBW |
205 | 515 | 40 | 217 | 95 |